How to detect lipstick and lipstick hardness breaking force

Lipstick and lipstick are one of the essential cosmetic products for women. They can make the lips rosy and lustrous, increase the beauty of the face and correct the contours of the lips. However, sometimes the user's strength is too large, resulting in lipstick breakage, so the lipstick breaking force index has no relevant national standards, but many companies use the lipstick breaking force tester to test product quality and establish internal quality control standards during the production process. Ensure that the lipstick has a reasonable bending, crushing, breaking or breaking force value during use.

The lipstick breaking instrumentdeveloped by Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd. (also known as lipstick breaking instrument,lipstick breaking force tester, etc. ) can detect the breaking force value of lipstick, lipstick and Eyebrow Pencil, adopting fully automated operation and fast test speed. To meet the testing needs of cosmetics manufacturers and help enterprises establish a sound internal quality control system. The following is a brief introduction to the experimental solution for breaking the lipstick and lipstick hardness.

Lipstick and lipstick breaking force detecting instrument

How to test the hardness of lipstick and lipstick ? First of all, Xiaobian first introduces the working principle of the lower Lip Balm breaker :

The test sample is clamped between the two collets of the lipstick breaking tester, and the two collets are moved relative to each other. The bottle neck is separated from the flat body by a special collet, and the force value change during the process is tested by the breaking force sensor. The displacement changes. The corresponding force value data is obtained.

Detection steps:
(1) Turn on the power, turn on the switch, and press the [Switch] key to enter the test interface;
(2) Press the [Switch] key to enter the parameter setting interface, change the running speed to 10mm/min, change the operating mode to automatic, and change the return speed to 100mm/min;
(3) Press the [Switch] key to return to the test interface;
(4) Press the [up] or [down] button to raise the lever to the appropriate position;
(5) Place the prepared sample on the test stand, micro-debug the position of the sample, align the tip of the pressure bar with the bottle neck of the sample, and cover the protective cover;
(6) Press [Clear] to clear the test interface force value and displacement, press [Delete] to clear the previous test result;
(7) Press the [Down] button, the pressure bar will drop at a constant speed of 10mm/min, apply pressure to the sample, and separate the bottleneck of the sample from the bottle body;
(8) After the sample is crushed, the pressure bar returns to the initial position at a speed of 100 mm/min, and the test interface displays [stop", and the test of the sample ends;
(9) Replace the sample and repeat steps 5-8;
(10) After the test is over, press the [Print] key to print the test results.
Note: When a single set of print results is required, you can print after the single set of tests, and then delete the information to continue the next set of tests; also click the [Results] button on the test interface to enter the results interface, page through the query history, and then print the current Single set of data.

Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd. (registered brand: Sumspring Sanquan Zhongshi) is a high-tech innovative enterprise specializing in the research and development and sales of laboratory analytical instruments. The company was established in 2007 and specializes in quality inspection and drug inspection systems. The food industry, pharmaceutical industry, packaging and printing industry, adhesive industry, home appliance industry, etc. provide packaging materials scientific testing instruments and comprehensive quality control solutions.